main control unit
英 [meɪn kənˈtrəʊl ˈjuːnɪt]
美 [meɪn kənˈtroʊl ˈjuːnɪt]
网络 监控主板; 微控器单元; 主控制器; 主控单元; 主控制单元
双语例句
- In order to implement the automation and digitalization of control system for asphalt recycling machine, PLC and HMI are used as the main control unit while running.
为实现沥青再生机控制系统的自动化和数字化要求，采用PLC和触摸屏作为沥青再生机的运行主控单元。 - Applications of High Performance Processor in Main Control Unit
一种高性能处理器在主控单元中的应用 - Design of Main Control Unit of Mine-used Assembled Switch
矿用组合开关主控单元的设计 - The thesis presents the analysis about the process of the communication between the computer and the single chip microprocessor inside the main control unit, and gives out the related circuit realization.
文中对主控制单元中系统机与单片机的通信进行了分析，并给出了相关的电路实现。 - The program controls implemented in cell device and main control unit are compared, and the reason of current implementation in cell device is analyzed.
从程序化控制发展的背景，通过对在间隔层装置与在主控单元中实现程序化控制的比较，分析了程序化控制目前进化为通过间隔层装置实现的缘由。 - The main control unit like the microcomputer embedded in the automatic meteorological observation system, is the control and operation core of the whole gather system. The quality of its performance determines directly the kinds of the collector function and excellence of performance.
主控单元犹如嵌入到自动气象观测系统中的微型计算机，是整个采集系统的控制与运行核心，其性能的好坏直接决定数据采集器功能的多寡和性能的优异。 - Based on the safety distance model, the software and hardware of the main control unit of sub-system and radar ranging of sub-system is designed, the key technologies is solved.
在安全距离的基础上，对主控单元子系统和雷达测距子系统进行了软、硬件设计，解决了系统功能所需要的关键技术。 - ARM chip is chosen as the master chip of main control unit, main control unit includes data storage circuit and key and LCD display interface circuit besides.
主控单元的主控芯片选用了ARM芯片，并配以数据存储电路、按键和液晶显示接口电路。 - Hardware circuit and electric connection design which takes S7-200 PLC as the main control unit is analyzed in detail.
介绍了智能型固态电机软起动器的系统设计、工作原理，详细分析了以S7-200PLC为主控单元的硬件电路设计，以及电气连接。 - The communication among the CNC main control unit, servo driving unit, and the I/ O unit is studied, the communication on the basis of industrial Ethernet network and Intranet/ Internet is researched, and key technologies are provided.
详细介绍了嵌入式数控系统内CNC主控单元与伺服驱动及I/O逻辑控制等各单元间的通信、车间级工业以太网络的通信和Intranet/Internet网络通信，并给出了关键实现技术。 - According to requirements of the industrial production and the function of vacuum welding equipment, and in combination with the present automatic technology and products, control system based on PLC as the main control unit was developed for the vacuum welding equipment.
根据工业化生产和真空焊箱的功能要求，并结合当前的自动化控制技术和产品，研制出基于PLC为主控单元的真空焊箱控制系统。 - This assay designed the main control unit in CWDM system. Its chief function: main control, net management, net communicating.
本文研制设计了CWDM系统中的主控盘，它完成的主要功能有：主控，网络管理、网络通信等三大功能。 - The application of MPC Which is used in biber start system, speed regulating sys-tem and tensile control system is introduced, a new control system for constant tensile force which uses MPC as main control unit designed.
介绍了磁粉离合器在缓冲起动系统、调速系统及张力控制系统中的应用，并设计了一种把磁粉离合器做为控制元件的新型张力控制系统。 - Research and Development of Main Control Unit of the Meteorological Data Collector
气象数据采集器主控单元的研究与构建 - Research on the Main Control Unit in the Electric Control System of Thermal Power Plant
火电厂电气监控中主控单元的研究 - The paper describes the method of signal transmission for matching control of shearer and conveyor. By applying the monolithic processor in main control unit, no more control wire needed than the original one, a simple but reliable signal transmission system is accomplished.
文章介绍了井下采煤机与输送机配合控制的信号传输方法，即在不增加原系统控制传输信号线的情况下，结合主控制器中的单片机实现简单可靠的信号传输。 - Chapter four introduces the hardware design of main control unit in detail.
第四章详细介绍了其中主控单元的硬件设计各部分功能； - The hardware circuit comprises three parts: inverter, detecting circuit and main control unit.
硬件分为三大部分，逆变器、检测电路和主控单元。 - The main control unit of PLC listed I/ O signals and marked designations according to the control request.
PLC主控单元根据控制要求列出输入输出信号并标出代号。 - This thesis analysis architecture characteristic of the harvesting robot, and is analyzed the robot system composed of the main control unit, the amount of information input unit, and the robot executing agencies.
分析了采摘机器人的体系结构特点，并对组成机器人系统的主控制单元、信息量输入单元、机器人执行机构这三个部分进行了系统分析。 - Hardware design: Main control unit and axle-count unit use the "two out of two" security structure; Using the dynamic drive safety I/ O circuit.
硬件设计方面：主控单元和计数单元采用了二取二结构；选用动态驱动安全型输入输出电路。 - Finally, use Nios II IDE to achieve customizing and debugging software systems, introduces the algorithms of the IP core, which is the main control unit, and researches the functions.
最后利用NIOSIIIDE实现软件系统的定制和调试，并介绍了主要控制部件的IP核的算法和功能函数的研究。 - System uses two identical PLC redundancy control as main control unit, preparation and finishes the implementation of communication, it ensures the safety of electronic control system.
系统采用两台相同的PLC构成冗余控制，分别作为主、备控单元，并且实现通讯，保证了电控系统的安全性。 - Data acquisition unit is designed to accomplish the sensor collections and communications, the main control unit carries through the work of system operation control, running state monitor, parameter set and so on.
数据采集单元完成信号的采集和通信；主控单元进行系统运行控制、状态监控、参数设定等工作。 - Make design of system motherboard, main control unit, and DC motor drive unit for the production and debug.
设计系统主板、主控单元、直流电机驱动单元并进行制作和调试。 - Data is processed and analyzed by the main control unit.
主控制单元负责对数据进行存储、处理和分析。 - Terminal service is realized by the connection of the service function part on the main control unit and the corresponding systems.
系统终端业务是通过站端设备的主控制单元上业务子板与相应系统的对接实现的。 - The system includes the main control unit, light intensity detection circuit, Temperature control unit, Data communication module, samples of milk out of the control unit, as well as liquid crystal display system.
建立了牛奶成分检测系统，该系统包括主控制单元、光强检测电路、温度控制单元、数据通讯模块、牛奶样本进出控制单元、以及液晶显示单元。 - Firstly, providing detailed analysis of all circuit hardware device selection and parameter design; then the main control unit of DSP and signal detection hardware device is designed; finally the control flow diagram and the software anti-interference measures of the system is designed.
首先对各个电路硬件系统的器件选型以及部分参数设计提供了详细的分析介绍；然后设计了DSP主控单元以及信号检测部分硬件装置；最后设计了系统的主控流程图以及系统软件抗干扰措施。